進口軸承有一定的使用壽命，這比其*他產品更差，軸承也與其*他行業不同。軸承的性能和使用壽命與許多因素有關。軸承壽命的計算是基于軸承的規格。環境是可以負擔得起的。工作時間，作為進口軸承的壽命，不是每天計算的。例如，我們的6330深溝球軸承的使用壽命是連續運行，也就是說，深溝球泰州INA軸承運行的極限時間太多，當然，如果繼續使用，對軸承的損壞會更大。

imported bearings have a certain service life, which is worse than other products, and bearings are different from other industries. The performance and service life of bearings are related to many factors. The calculation of bearing life is based on bearing specifications. The environment is affordable. Working hours, as the life of imported bearings, are not calculated every day. For example, the service life of our 6330 deep groove ball bearings is continuous operation, that is to say, the limit time of deep groove ball Taizhou INA bearings is too long, of course, if we continue to use, the damage to the bearings will be greater.

損害的面積和比例是多少？

What is the area and proportion of damage?

1。軸承安裝不當（約占比16個百分點）

1. Improper installation of bearings (about 16 percentage points)

1。在軸承的安裝中，使用蠻力，錘擊是**有害的泰州INA軸承，這是造成軸承變形的主要原因。

1. In the installation of bearings, the use of brute force and hammering is harmful to Taizhou INA bearings, which is the main cause of bearing deformation.

2。安裝未到位，安裝偏差或未安裝在軸承位置，導致軸承間隙過小。內圈和外圈不在同一個旋轉中*心，產生不同的中*心。

2. Installation is not in place, installation deviation or not installed in the bearing position, resulting in too small bearing clearance. The inner circle and the outer circle are not in the same revolving center, producing different centers.

建議：選擇合適的或專*業的軸承安裝工具，安裝后使用專用儀器進行檢測。

Suggestion: Select suitable or special bearing installation tools, and use special instruments to test after installation.

2。據調查，潤滑不*良是造成軸承過早損壞的主要原因之一。其主要原因是：潤滑劑或潤滑劑未及時填充；潤滑劑或潤滑劑未被填充；潤滑劑或潤滑劑的選擇不當；潤滑方法不當。

2. According to investigation, poor lubrication is one of the main causes of premature bearing damage. The main reasons are: the lubricant or lubricant is not filled in time; the lubricant or lubricant is not filled; the choice of lubricant or lubricant is inappropriate; and the lubrication method is inappropriate.

建議：選擇合適的潤滑劑或潤滑劑，使用正確的泰州INA軸承潤滑和填充方法。

Suggestion: Choose the appropriate lubricant or lubricant, and use the correct lubrication and filling method of Taizhou INA bearing.

三。疲勞（約占比34個百分點）

Three. Fatigue (about 34 percentage points)

疲勞損傷是軸承損壞的常見方式。疲勞損傷的常見原因可能是：軸承的長期過載運行；不當的維護；不當的維護；設備老化等（約占比14個百分點）。

Fatigue damage is a common way of bearing damage. Common causes of fatigue damage may be: long-term overload operation of bearings; improper maintenance; improper maintenance; equipment aging, etc. (about 14 percentage points).

污染也會導致過早的軸承損壞。污染指的是灰塵、金屬屑等進入軸承內部。其主要原因是：使用前軸承包裝過早打開，造成污染；安裝過程中工作環境不潔，造成污染；泰州INA軸承工作環境不潔，工作介質污染等。

Pollution can also lead to premature bearing damage. Pollution refers to dust, metal chips and so on into the bearing interior. The main reasons are as follows: premature opening of bearing packages before use causes pollution; unclean working environment during installation causes pollution; unclean working environment of INA bearing in Taizhou and pollution of working medium.

總結和分析問題：

Summarize and analyze issues:

大部分進口軸承的早期損壞是由于潤滑不當造成的，所以為了保持進口軸承的良好使用，潤滑不應該被忽視，一小部分原因是由于安裝造成的，因為使用進口軸承的操作者和安裝人員基本上是1。也有通信線路。軸承總是處于安裝狀態，所以軸承的安裝步驟非常重要。要明白，這樣的錯誤是不會犯的，概率很小，但是有很多不正確的操作。二是疲勞。我們的進口軸承**好不要連續運行和超載。他們也應該在受控的時間氛圍中休息。污染是相對于那些露天運行的軸承，容易進入灰塵，妨礙操作，是進口軸承的早期失效。

Most of the early damage of imported bearings is due to improper lubrication, so in order to maintain the good use of imported bearings, lubrication should not be ignored, a small part of the reason is due to installation, because the operators and installers using imported bearings are basically 1. There are also communication lines. Bearings are always in the installation state, so the installation steps of bearings are very important. Understand that such mistakes will not be made, the probability is small, but there are many incorrect operations. The two is fatigue. Our imported bearings should not run continuously and overload. They should also rest in a controlled time atmosphere. Pollution is relative to those open-air running bearings, easy to enter dust, hinder operation, is the early failure of imported bearings.

文章來自：泰州SKF軸承 www.wh-skf.com

Article from: Taizhou SKF Bearing www.wh-skf.com

文章來自：泰州INA軸承 www.ina-china.cn

Article from: Taizhou INA Bearing www.ina-China.cn

文章來自：泰州NSK軸承 www.klbbearings.com

Article from: Taizhou NSK Bearing www.klbbearings.com

QQ：524085168

電話：0510-81207777

手機：13311666672/13395185757