國際經濟復蘇后，五金配件泰州SKF軸承在出口市場迎來了發展的黃金時期，在發展中國家尤其如此。由于機械加工業的相對滯后和總體老化，發展中國家對進口五金產品的需求普遍強勁。五金商家抓住這個大好機會，通過貿易協定和交易，逐步開拓了巨大的出口市場和貿易業務。羅百輝建議，五金外貿企業要及時應對形勢，積極參與國際展覽會，提高產品質量，加大產品創新，積極創造符合國際歐共體的低碳產品。社區。社區。社區。基本情況。了解歐盟指令的硬件產品出口標準，以拓展國外市場。中國五金制品的國際市場占有率。

After the recovery of the international economy, Taizhou SKF bearing, a hardware accessory, ushered in a golden period of development in the export market, especially in developing countries. Due to the relative lag and overall aging of the mechanical processing industry, the demand for imported hardware products in developing countries is generally strong. Hardware merchants seize this great opportunity to gradually open up a huge export market and trade business through trade agreements and transactions. Luo Baihui suggested that hardware foreign trade enterprises should respond to the situation in a timely manner, actively participate in international exhibitions, improve product quality, increase product innovation, and actively create low-carbon products in line with the international European Community. Community. Community. Community. Basic situation. Understand the export standards of hardware products of EU directive, so as to expand the foreign market. The international market share of Chinese hardware products.

1。泰州SKF軸承各種機械傷痕，如磨損、劃傷、斷裂、劃傷等，都會導致軸承安裝不順暢，造成偏心載荷和應力集中，導致旋轉精度和使用壽命降低。

1. All kinds of mechanical scars of SKF bearing in Taizhou, such as wear, scratch, fracture, scratch, etc., will lead to the installation of bearing not smooth, resulting in eccentric load and stress concentration, leading to the reduction of rotational accuracy and service life.

2。腐蝕、黑皮膚和點蝕是容易儲存水分和污垢的缺點，并且很有可能發展成腐蝕。腐蝕是污染的根本原因，導致安裝不順暢、早期磨損和疲勞。嚴重的腐蝕導致廢物的產生。

2. Corrosion, black skin and pitting are the shortcomings of easy storage of moisture and dirt, and are likely to develop into corrosion. Corrosion is the fundamental cause of pollution, resulting in poor installation, early wear and fatigue. Serious corrosion leads to the production of waste.

三。各種裂紋，如原材料裂紋、鍛造裂紋、熱處理裂紋和磨削裂紋，將成為今后軸承運行中應力集中和快速膨脹的來源，導致軸承斷裂，對泰州SKF軸承的壽命和壽命產生重大影響。軸承。軸承。軸承。軸承的穩定性。很好。事實上，軸承廠為了重要目的進行了多次磁或射線檢查。

Three. All kinds of cracks, such as raw material cracks, forging cracks, heat treatment cracks and grinding cracks, will become the source of stress concentration and rapid expansion in the future operation of bearings, leading to bearing fracture, which will have a significant impact on the life and life of SKF bearings in Taizhou. Bearing. Bearing. Bearing. Stability of bearing. Very good. In fact, the bearing factory has carried out many magnetic or radiographic examinations for important purposes.

4。當剝離和折疊時，這兩個缺點沒有牢固地集成到母材中，并且它們周圍有不同程度的脫碳或碳消耗。材料容易出現塌陷、凹陷或磨損，嚴重影響軸承的使用壽命和精度。

4. When peeling and folding, these two shortcomings are not firmly integrated into the base metal, and there are varying degrees of decarbonization or carbon consumption around them. Materials are prone to collapse, sag or wear, which seriously affect the service life and accuracy of bearings.

5。保持架的鉚接或**質量主要觀察泰州SKF軸承鉚頭是否偏移、歪斜、**、缺少肉眼或肉眼、**位置是否正確、**接頭是否過大或過小、**強度是否過強或過大。EADS滾動干擾。

5. The riveting or ** quality of cage mainly observes whether the rivet head of Taizhou SKF bearing is offset, skewed, **, lack of naked eye or naked eye, ** position is correct, ** joint is too large or too small, ** strength is too strong or too large. EADS rolling interference.

上述項目是中國進口軸承檢驗的重要組成部分。除上述部分外，如果打字質量不好，如果筆跡模糊或損壞，應視為次品，如果情況嚴重，則不能接受。

The above items are an important part of the inspection of imported bearings in China. Except for the above parts, if the typing quality is not good, if the handwriting is blurred or damaged, it should be regarded as inferior, if the situation is serious, it can not be accepted.

它的危害是相當嚴重的。一些國有企業的泰州SKF軸承質量一般比較好，但由于成本高，在競爭中處于劣勢。然而，一些窮國甚至窮國正在以低價競買國家利益。當前，有必要進一步規范市場，**公平競爭，提高電氣零部件外貿市場的競爭力。真的很繁榮。

Its harm is quite serious. Taizhou SKF bearings of some state-owned enterprises are generally of good quality, but they are at a disadvantage in competition because of their high cost. However, some poor countries and even poor countries are bidding for national interests at a low price. At present, it is necessary to further standardize the market and ** compete fairly to improve the competitiveness of the foreign trade market of electrical components. It's really prosperous.

文章來自：泰州SKF軸承 www.wh-skf.com

The article is from: Taizhou SKF bearing www.wh-skf.com

文章來自：泰州INA軸承 www.ina-china.cn

The article is from: Taizhou INA bearing www.ina-china.cn

文章來自：泰州NSK軸承 www.klbbearings.com

The article is from: Taizhou NSK bearing www.klbbearings.com

QQ：524085168

電話：0510-81207777

手機：13311666672/13395185757