鎮江NSK軸承是一種元件，廣泛應用于各個領域，根據結構或類型分為多種，并根據摩擦特性來分類常見的滾動軸承和滑動軸承，兩者都有所不同。滾動軸承的摩擦阻力遠小于滑動軸承的摩擦阻力。它具有啟動快、效率高的優點。與滑動軸承相比，滾動軸承是大的優點。但是也有缺點，即尺寸較大，所以吸收振動的能力較弱，在高速運行時間較短，長期使用也會發出較大的異常聲音。滾動軸承和滑動軸承的另一個本質區別是滾動軸承是表面接觸，而滑動鎮江NSK軸承是點接觸。滾動軸承接觸面大，結構簡單，操作拆卸方便，對滑動軸承的潤滑要求高。

Zhenjiang NSK bearing is a kind of component, which is widely used in various fields. It is divided into many kinds according to its structure or type, and classifies common rolling bearings and sliding bearings according to their friction characteristics. Both of them are different. The friction resistance of rolling bearings is much smaller than that of sliding bearings. It has the advantages of fast start up and high efficiency. Compared with plain bearings, rolling bearing is a great advantage. But there are also drawbacks, that is, the larger size, so the ability to absorb vibration is weak, in high-speed running time is short, long-term use will also emit a larger abnormal sound. Another essential difference between rolling bearings and sliding bearings is that the rolling bearings are surface contact, while the sliding Zhenjiang NSK bearings are point contact. Rolling bearing has large contact surface, simple structure, convenient operation and disassembly, and high lubrication requirement for sliding bearings.

當雙向推力球軸承在拆卸檢查后損壞時，可根據軸承的損壞程度來判斷故障和軸承損壞。

When the two-way thrust ball bearing is damaged after disassembly inspection, the fault and bearing damage can be judged according to the damage degree of the bearing.

在周期性波動載荷下，內外滾道表面發生周期性接觸應力變化。當應力循環次數達到一定值時，疲勞剝落發生在軋制面或內外滾道上。如果軸承載荷過大，則會加劇疲勞。此外，如果鎮江NSK軸承錯位，軸彎曲，滾道就會脫落。軸承滾道的疲勞剝落會降低軸的工作精度，引起振動和噪聲機理。

Under cyclic loading, periodic contact stress changes on the inner and outer raceway surfaces. When the number of stress cycles reaches a certain value, fatigue peeling occurs on the rolling surface or inside and outside raceway. If the bearing load is too large, it will aggravate fatigue. Besides, if the NSK bearing of Zhenjiang is misplaced and the shaft is bent, the raceway will fall off. The fatigue peeling of the bearing raceway will reduce the working accuracy of the shaft and cause the vibration and noise mechanism.

燃燒軸承在滾道和滾動體上有回火顏色。溫高通常是由于潤滑不足，潤滑不順或惡化，以及過度軸承裝配。

The combustion bearings have tempering colors on raceway and rolling body. High temperature is usually due to inadequate lubrication, poor lubrication or deterioration, and excessive bearing assembly.

鎮江NSK軸承滾道與接觸面的滾動面之間出現凹痕，表明軸承存在塑性變形。其原因是，這通常發生在低速軸承在靜態或沖擊載荷下，其中工作表面上的局部應力超過材料的屈服極限。

The dent between the NSK bearing raceway of Zhenjiang and the rolling surface of the contact surface indicates that the bearing has plastic deformation. The reason is that this usually occurs in low-speed bearings under static or impact loads, where the local stress on the working surface exceeds the yield limit of the material.

軸承套圈開裂是造成軸承配合過大、內外圈松動、軸承座變形、軸承表面安裝和加工異常的主要原因。

Bearing ring cracking is the main reason for excessive bearing fit, loosening of inner and outer rings, bearing seat deformation, bearing surface installation and machining abnormalities.

其原因是潤滑不足，滾動體斷裂，閥座環歪斜等。

The reason is that the lubrication is insufficient, the rolling body is broken, the seat ring is skewed, etc.

可能的原因是滾子卡在籠子里或不夠潤滑。

The possible reason is that rollers are stuck in cages or not lubricated enough.

可能是落在閥座上的異物、鎮江NSK軸承潤滑油不足或潤滑油水平不當。

It may be a foreign object falling on the valve seat, insufficient lubricating oil in Zhenjiang NSK bearing or improper lubricating oil level.

載荷、潤滑、裝配、環境條件、材料質量或制造精度是影響雙向推力球軸承損壞的主要因素。

Load, lubrication, assembly, environmental conditions, material quality or manufacturing accuracy are the main factors affecting the damage of bi-directional thrust ball bearings.

文章來自：鎮江SKF軸承 www.wh-skf.com

The article is from: Zhenjiang SKF bearing www.wh-skf.com

文章來自：鎮江INA軸承 www.ina-china.cn

The article is from: Zhenjiang INA bearing www.ina-china.cn

文章來自：鎮江NSK軸承 www.klbbearings.com

The article is from: Zhenjiang NSK bearing www.klbbearings.com

QQ：524085168

電話：0510-81207777

手機：13311666672