鎮江INA軸承在存放過程中會受到環境的影響或者在結晶的工作中會產生生銹的效果，而在我們手中會產生生銹的汗水，因此我們的軸承不容易暴露在車身、包裝和存放中，所以我們必須做好防銹步驟。

Zhenjiang INA bearings will be affected by the environment in the process of storage or in the crystallization of the work will produce rust effect, and in our hands will produce rust sweat, so our bearings are not easy to expose to the car body, packaging and storage, so we must do a good job of rust prevention steps.

440是鎮江INA軸承中常用的不銹鋼。它的強度足以承載重量（比黃銅鋼低20%），但防銹性足以承受250C瞬時溫度和300C連續溫度。鹽、酸和堿。316級具有良好的抗銹性，無磁性，但輕載輕載。因?yàn)樗粡?qiáng)，不準確，感覺粗糙。

The 440 is the stainless steel commonly used in Zhenjiang INA bearings. It is strong enough to carry weight (20% lower than brass steel), but rust resistant enough to withstand 250C instantaneous temperature and 300C continuous temperature. Salt, acid and alkali. The 316 grade has good rust resistance, no magnetism, but light load and light load. Because it is not strong, inaccurate, and feels rough.

軸承

Bearing

因此，在選擇防銹材料時，根據性能試驗中的質量要求，根據試驗中的操作要求和工藝要求，選擇合適的防銹材料。它可以大量使用。選用優良的防銹輔助材料，加工廠可根據不同的材料進行質量檢測，可用來提供局部分布的后軸承。使用常規防銹材料對溶液進行測試，并確保溶液的濃度和比例滿足制備過程中的工藝要求和性能。建立了完整的材料驗收體系和質量驗收標準，為鎮江INA軸承腐蝕提供了可靠的保證。

Therefore, in the selection of anti-rust materials, according to the quality requirements in the performance test, according to the operation requirements and process requirements in the test, choose the appropriate anti-rust materials. It can be used in large quantities. Selection of good rust-proof auxiliary materials, processing plants can be based on different materials for quality testing, can be used to provide local distribution of rear bearings. The solution was tested with conventional antirust materials to ensure that the concentration and proportion of the solution met the technological requirements and performance in the preparation process. A complete material acceptance system and quality acceptance standard were established, which provided a reliable guarantee for the corrosion of Zhenjiang INA bearing.

1。主軸軸承在運行中，要保證足夠的潤滑，并根據實際情況定期使用潤滑油，不能長時間停油。因此，對于用戶企業來說，應該選擇更好、更合適的錠子潤滑劑。新型主軸油能顯著提高軸承和主軸的潤滑性能，延長旗桿的使用壽命，延長鎮江INA軸承和主軸的使用壽命，并具有良好的耐腐蝕性能。

1. Spindle bearings in operation, to ensure adequate lubrication, and according to the actual situation of regular use of lubricant, can not stop oil for a long time. Therefore, for user enterprises, better and more suitable spindle lubricants should be selected. The new spindle oil can remarkably improve the lubrication performance of bearing and spindle, prolong the service life of flagpole, prolong the service life of Zhenjiang INA bearing and spindle, and has good corrosion resistance.

2。對于尼龍軸承，軸承應在低于120度的溫度下使用，嚴禁油。

2. For nylon bearings, bearings should be used at temperatures below 120 degrees, and oil is strictly prohibited.

三。應注意主軸維護和清洗方法，防止損壞和劃傷滾輪表面。盡可能去除軸承零件的殘留物。應采用沖洗法，錠腳應大于內清洗油。應注意避免因噪音問題、軸承磨損和撕裂失效而造成的清洗殘留物在軸承部件中積聚和傾倒。

Three. Attention should be paid to spindle maintenance and cleaning methods to prevent damage and scratch the surface of the roller. Remove residue from bearing parts as far as possible. The flushing method should be adopted and the spindle foot should be larger than the inner cleaning oil. Care should be taken to avoid the accumulation and dumping of cleaning residues in bearing parts due to noise problems, bearing wear and tear failure.

文章來自：鎮江SKF軸承 www.wh-skf.com

The article is from: Zhenjiang SKF bearing www.wh-skf.com

文章來自：鎮江INA軸承 www.ina-china.cn

The article is from: Zhenjiang INA bearing www.ina-china.cn

文章來自：鎮江NSK軸承 www.klbbearings.com

The article is from: Zhenjiang NSK bearing www.klbbearings.com

QQ：524085168

電話：0510-81207777

手機：13311666672