MF系列中頻逆變直流點（凸）焊機

MF Series Medium Frequency Inverter DC Spot Welding Machine

整機特性

1、高質量、高效率的焊接能力，功率因數達98%，三相輸入負載平衡，對用戶電網的沖擊大大減少，輸出電流為直流，電流平滑，感抗為零，1000HZ的工作頻率，時間控制精度為1MS；

2、高強度的機體結構，剛性好，垂直式加壓機構，導向采用直線導軌，隨動性高；

3、采用高速微處理器，運用智能最優算化法，液晶屏界面，可存儲60套焊接規范，具有中英文切換顯示，提供外部BCD碼調用接口，系統故障自動診斷報警等功能；

4、特別適合焊接導電性較高的鋁、銅材料，比較厚的工件。廣泛適用于航空、航天、汽車、壓縮機及其他領域的高端產品的焊接要求。

 Main Features

l  High quality,high efficiency,98% power factor,three-phase input load balancing,the impact on the user grid greatly reduced,DC input current,smooth,inductance is zero,1000HZ working frequency,time control precision is 1MS;

l  High-strength body structure,good rigidity,direct pressurizing mechanism,linear bearings used in the guiding structure enable good mobility;

l  Adopt high-speed  microprocessors,use intelligent optimal calculation method,LCD interface,can save 60sets welding schedule numbers,There are functions of switch display in both Chinese and English,provide external BCD call interface,system fault diagnosis alarm automatically.etc;

l  Specially suitable for welding higher conductive rate of material(such as aluminum,copper,silver and so on) and  much more thicker workpiece,widely used in automobile,aerospace and other high request products and industry.

 主要技術參數    Main Technical Parameters