1、過濾器采用FRP材質，部件一次成型， 標準化生產，更換、維修方便。

· 2、過濾器進出水口連接有4"coupling,拆裝方便，視覺美觀、整齊。

· 3、過濾器采用上部進水，濾芯受沖擊阻力小;頂部裝有排氣閥，便于過濾器中空氣排出。

· 4、過濾器底部系統與頂部濾芯定位壓緊板均采用一-體式設計，濾芯的安裝并壓緊既容易又可避免內漏現象。

· 5、過濾器封蓋與本體連接采用吊環螺絲法蘭式密封，既確保過濾器完好的密封性能，又給更換濾芯的拆裝帶來了方便和快捷且使過濾器能承受更大壓力。

· 6、過濾器為FRP材質成型,具有較強的耐腐蝕性，能用于不銹鋼不能代替的化工行業及海水淡化領域。

· 1.All the parts of this series filters are made of FRP material.

· 2.The inlet and outlet , which connected with the pipe is adopt a 4" coupling.

· 3.The distribution system of HPCF filters is distributed from top.Water is well-proportioned with small strike to cartridges and air is easy to be discharged.

· 4.The bottom system of HPCF filter is designed together as a whole with the top localizer & closure system.Cartridges are easy to be installed, push down and closed, preventing leaking inside.

· 5.The lid and the body are connected using eyebolts flange method, Ensure a good seal performance. and ensure the filter can stand higher pressure.

· 6.HPCF filter is corrosion resistant, It can be used in SS none- replace field, and seawater treatment field